Extrusions

and cladding components

Generally, extrusions are cut to lengths that reflect the height of the panels that are going to be fixed to them.

Typically storey-height profiles are cut so that the panels are located on one set of vertical profiles and do not ‘bridge’ the expansion gap between two profiles. These are secured to the bracket using a secondary fixing.

L Rails

Product Code

Description

*02/L60-40-2.2-3000

L Profile 60 x 40 x 2.2 x 3000

02/L60-40-2.2-6000

L Profile 60 x 40 x 2.2 x 6000

Powder coating or anodising available upon request

*Available upon request, lead time applies

T Rails

Product Code

Description

*02/T40-100-2.2-3000

T Profile 40 x 100 x 2.2 x 3000

02/T40-100-2.2-6000

T Profile 40 x 100 x 2.2 x 6000

*02/T60-100-2.2-3000

T Profile 60 x 100 x 2.2 x 3000

02/T60-100-2.2-6000

T Profile 60 x 100 x 2.2 x 6000

*02/T40-120-2.2-3000

T Profile 40 x 120 x 2.2 x 6000

*02/T40-120-2.2-6000

T Profile 40 x 120 x 2.2 x 6000

*02/T60-120-2.2-3000

T Profile 60 x 120 x 2.2 x 3000

*02/T60-120-2.2-6000

T Profile 60 x 120 x 2.2 x 6000

Powder coating or anodising available upon request

*Available upon request, lead time applies

Omega Rails & Trim

Product Code

Description

02/OM25-120-2.4- 6000

25mm Omega – Mill Finish 6000

*02/OM25-120-2.4-6000-PC

25mm Omega – Powder Coat Finish 6000

*02/OM40-140-2.4-6000

40mm Omega – Mill Finish 6000

*02/OM40-140-2.4-6000-PC

40mm Omega – Powder Coat Finish 6000

02/OM25-Trim-3000

Omega 25 Centre Trim – Mill Finish 30 x 22 x3000

*02/OM25-Trim-3000-PCBK

Omega 25 Centre Trim – Black Powder Coat Finish 30 x 22 x3000

06/T61101-25M

24mm x 1.6mm thick single sided EPDM tape – 25m roll

Powder coating or anodising available upon request

*Available upon request, lead time applies

Z Rails

Product Code

Description

02/Z25-45-30-2.4-6000

25mm Z – Mill Finish x 6000

*02/Z25-45-30-2.4-6000-PC

25mm Z – Powder Coat Finish x 6000

*02/Z40-55-30-2.4-6000

40mm Z – Mill Finish x 6000

*02/Z40-55-30-2.4-6000-PC

40mm Z – Powder Coat Finish x 6000

Powder coating or anodising available upon request

*Available upon request, lead time applies

Box Rails & Spigot

Product Code

Description

02/B75-46-6000

NVF2F Box Profile 46 x 75 x 3.0 x 6000

02/TB75-125-6000

NVF2F T Box Profile 125 x 75 x 3.0 x 6000

01/NVF2F-SGT

NVF2F Joining spigot

Powder coating or anodising available upon request

NV3 Rails, Trim

Product Code

Description

02/CP-NV3-3000

Carrier Profile NV3 System x 3000

02/CP-NV3-6000

Carrier Profile NV3 System x 6000

02/V8.5-60-1.4-3000-PCBK

Vertical Express Joint Backing Trim – Black Powder Coat 8.5 x 60 x 3000

02/H6.5-60-1.4-3000-PCBK

Horizontal Express Joint Backing Trim – Black Powder Coat 6.5 x 60 x 3000

06/T61102-25M

12mm x 3.2mm thick single sided EPDM tape – 25m roll

06/T62936-25M

18mm x 1.6mm thick double sided PE foam tape – 25m roll

Powder coating or anodising available upon request

*Available upon request, lead time applies

NV3 Hangers

Product Code

Description

Keil

03/NV3-KEIL-ADJF

NV3 (MLZ) Fixed/ Levelling Hanger to suit Keil Anchor

03/NV3-KEIL-STAT

NV3 (MLZ) Static Hanger to suit Keil Anchor

PTS

03/NV3-PTS-ADJF

NV3 (MLZ) Fixed/ Levelling Hanger HPL 2 x 6.5 PTS

03/NV3-PTS-STAT

NV3 (MLZ) Static Hanger HPL 2 x 6.5 PTS

Tergo

03/NV3-TER-ADJF

NV3 Fixed/ Levelling Hanger 1 x Tergo (Square Keil)

03/NV3-TER-STAT

NV3 Static Hanger 1 x Tergo (Square Keil)

Tergo Plus

03/NV3-TER-TEC-ADJF

NV3 Fixed/ Levelling Hanger 1 x Tergo plus (Tectiva Round Hole)

03/NV3-TER-TEC-STAT

NV3 Static Hanger 1 x Tergo plus (Tectiva Round Hole)

TUF-S

03/NV3-TUF-S-ADJ-3.5-M6

NV3 Levelling Hanger 3.5mm thick for TUF – Inc adjust screw (3 holes)

03/NV3-TUF-S-STAT-3.5

NV3 Static Hanger 3.5mm thick for TUF – (3 holes)

03/NV3-TUF-S-ADJ-5-M6

NV3 Levelling Hanger 5mm thick for TUF – Inc adjust screw (3 holes)

03/NV3-TUF-S-STAT-5

NV3 Static Hanger 5mm thick for TUF – (3 holes)

NV2 Adhesives

Product Code

Description

06/STA-205-1LTR

SIka® Aktivator – 100 – 1 Litre

06/STPP-1LTR

Sika® Primer-206 G+P – 1 Litre

06/STS-600

SikaTack® Panel – 10 – 600ml sausage

06/STT-33M

SikaTack® Panel Fixing Tape – 33 metre roll

SIKA

Fasteners

for NVELOPE® support systems
04/SDA5/5,5×20
Bracket to Vertical Rail & Carrier profile to Vertical Rail Fixing
Fastener material A4 Stainless Steel with carbon drill tip
Diameter 5.5mm
Length 19mm
Max Grip Range 8mm
Drill Capacity 8mm
Material Aluminium
04/SX3/28-S16-6X48-A4
Bracket to Steel Stud fixing A4 (316) stainless steel self drilling fasteners
Fastener material A4 Stainless Steel with carbon drill tip
Diameter 6mm
Length 48mm
Max Grip Range 28mm
Drill Capacity 8mm
Material Steel
04/TDA-S-S16-6,5X60
6.5mm x 60mm Timber Fixing with 16mm Washer
Fastener material A4 Stainless Steel with carbon drill tip
Diameter 6mm
Length 64mm
Max Grip Range N/A
Drill Capacity N/A
Material Timber
04/MULTI-MONTI-S-10X85
Stainless steel Primary Concrete Structural Anchor
Fastener material A4 Stainless Steel
bi-metallic
Diameter 10mm
Length 85mm
Max Grip Range N/A
Drill Capacity N/A
Material Masonry
04/SXR-10X80-FUS
10×80 A4 (316) Anchor with polyamide sleeve Bracket to Concrete/Brick fixing
Fastener material A4 Stainless Steel with polyamide sleeve
Diameter 10mm
Length 80mm
Max Grip Range N/A
Drill Capacity N/A
Material Masonry

Fasteners

for cladding attachment
Face fixing - Rivet

AP16 Aluminium Rivet
Ideal for cladding panels (HPL, fibre cement, others) to aluminium

SSO-D15 Stainless 316 Rivet
Ideal for cladding panels (HPL, fibre cement, others) to aluminium, metal or stainless steel
Face fixing - Screw
SX3-D12 Stainless Steel Self Drill  
Ideal for cladding panels (HPL, fibre cement, others) to aluminium or steel
TW-S D12 Stainless Self -Tapping
Ideal for cladding panels (HPL, fibre cement, others) to timber
irius® SX3-L 12 Stainless Self-Drill  
Ideal for cladding panels (HPL, fibre cement, others) to aluminium or steel

SDA4 D15 Stainless Steel Self Drill
Ideal for cladding panels (HPL, fibre cement, others) to aluminium

SX4 D15 Stainless Steel Self Drill
Ideal for cladding panels (HPL, fibre cement, others) to aluminium or steel
Concealed fixing - anchors
TUF/TUC Concealed Fastener
Fastener for HPL, fibre cement, or fibre concrete panels
Keil Concealed Fastener
Ideal for cladding panels (GRC, Dekton)                                                  

Karl Concealed Fastener
Ideal for cladding panels
(HPL, fibre cement, fibre concrete)                             

Tergo+ Concealed Fastener
Fastener for fibre cement                                    
Fischer Concealed Fastener
Ideal for cladding panels (HPL, fibre cement, GRC or ceramic)

Fischer Concealed Fastener
Ideal for cladding panels (natural stone)