Extrusions
and cladding components
Generally, extrusions are cut to lengths that reflect the height of the panels that are going to be fixed to them.
Typically storey-height profiles are cut so that the panels are located on one set of vertical profiles and do not ‘bridge’ the expansion gap between two profiles. These are secured to the bracket using a secondary fixing.
| L Rails | |
|---|---|
|
Product Code |
Description |
|
*02/L60-40-2.2-3000 |
L Profile 60 x 40 x 2.2 x 3000 |
|
02/L60-40-2.2-6000 |
L Profile 60 x 40 x 2.2 x 6000 |
Powder coating or anodising available upon request
*Available upon request, lead time applies
| T Rails | |
|---|---|
|
Product Code |
Description |
|
*02/T40-100-2.2-3000 |
T Profile 40 x 100 x 2.2 x 3000 |
|
02/T40-100-2.2-6000 |
T Profile 40 x 100 x 2.2 x 6000 |
|
*02/T60-100-2.2-3000 |
T Profile 60 x 100 x 2.2 x 3000 |
|
02/T60-100-2.2-6000 |
T Profile 60 x 100 x 2.2 x 6000 |
|
*02/T40-120-2.2-3000 |
T Profile 40 x 120 x 2.2 x 6000 |
|
*02/T40-120-2.2-6000 |
T Profile 40 x 120 x 2.2 x 6000 |
|
*02/T60-120-2.2-3000 |
T Profile 60 x 120 x 2.2 x 3000 |
|
*02/T60-120-2.2-6000 |
T Profile 60 x 120 x 2.2 x 6000 |
Powder coating or anodising available upon request
*Available upon request, lead time applies
| Omega Rails & Trim | |
|---|---|
|
Product Code |
Description |
|
02/OM25-120-2.4- 6000 |
25mm Omega – Mill Finish 6000 |
|
*02/OM25-120-2.4-6000-PC |
25mm Omega – Powder Coat Finish 6000 |
|
*02/OM40-140-2.4-6000 |
40mm Omega – Mill Finish 6000 |
|
*02/OM40-140-2.4-6000-PC |
40mm Omega – Powder Coat Finish 6000 |
|
02/OM25-Trim-3000 |
Omega 25 Centre Trim – Mill Finish 30 x 22 x3000 |
|
*02/OM25-Trim-3000-PCBK |
Omega 25 Centre Trim – Black Powder Coat Finish 30 x 22 x3000 |
|
06/T61101-25M |
24mm x 1.6mm thick single sided EPDM tape – 25m roll |
Powder coating or anodising available upon request
*Available upon request, lead time applies
| Z Rails | |
|---|---|
|
Product Code |
Description |
|
02/Z25-45-30-2.4-6000 |
25mm Z – Mill Finish x 6000 |
|
*02/Z25-45-30-2.4-6000-PC |
25mm Z – Powder Coat Finish x 6000 |
|
*02/Z40-55-30-2.4-6000 |
40mm Z – Mill Finish x 6000 |
|
*02/Z40-55-30-2.4-6000-PC |
40mm Z – Powder Coat Finish x 6000 |
Powder coating or anodising available upon request
*Available upon request, lead time applies
| Box Rails & Spigot | |
|---|---|
|
Product Code |
Description |
|
02/B75-46-6000 |
NVF2F Box Profile 46 x 75 x 3.0 x 6000 |
|
02/TB75-125-6000 |
NVF2F T Box Profile 125 x 75 x 3.0 x 6000 |
|
01/NVF2F-SGT |
NVF2F Joining spigot |
Powder coating or anodising available upon request
| NV3 Rails, Trim | |
|---|---|
Product Code | Description |
02/CP-NV3-3000 | Carrier Profile NV3 System x 3000 |
02/CP-NV3-6000 | Carrier Profile NV3 System x 6000 |
02/V8.5-60-1.4-3000-PCBK | Vertical Express Joint Backing Trim – Black Powder Coat 8.5 x 60 x 3000 |
02/H6.5-60-1.4-3000-PCBK | Horizontal Express Joint Backing Trim – Black Powder Coat 6.5 x 60 x 3000 |
06/T61102-25M | 12mm x 3.2mm thick single sided EPDM tape – 25m roll |
06/T62936-25M | 18mm x 1.6mm thick double sided PE foam tape – 25m roll |
Powder coating or anodising available upon request
*Available upon request, lead time applies
| NV3 Hangers | |
|---|---|
|
Product Code |
Description |
|
Keil |
|
|
03/NV3-KEIL-ADJF |
NV3 (MLZ) Fixed/ Levelling Hanger to suit Keil Anchor |
|
03/NV3-KEIL-STAT |
NV3 (MLZ) Static Hanger to suit Keil Anchor |
|
PTS |
|
|
03/NV3-PTS-ADJF |
NV3 (MLZ) Fixed/ Levelling Hanger HPL 2 x 6.5 PTS |
|
03/NV3-PTS-STAT |
NV3 (MLZ) Static Hanger HPL 2 x 6.5 PTS |
|
Tergo |
|
|
03/NV3-TER-ADJF |
NV3 Fixed/ Levelling Hanger 1 x Tergo (Square Keil) |
|
03/NV3-TER-STAT |
NV3 Static Hanger 1 x Tergo (Square Keil) |
|
Tergo Plus |
|
|
03/NV3-TER-TEC-ADJF |
NV3 Fixed/ Levelling Hanger 1 x Tergo plus (Tectiva Round Hole) |
|
03/NV3-TER-TEC-STAT |
NV3 Static Hanger 1 x Tergo plus (Tectiva Round Hole) |
|
TUF-S |
|
|
03/NV3-TUF-S-ADJ-3.5-M6 |
NV3 Levelling Hanger 3.5mm thick for TUF – Inc adjust screw (3 holes) |
|
03/NV3-TUF-S-STAT-3.5 |
NV3 Static Hanger 3.5mm thick for TUF – (3 holes) |
|
03/NV3-TUF-S-ADJ-5-M6 |
NV3 Levelling Hanger 5mm thick for TUF – Inc adjust screw (3 holes) |
|
03/NV3-TUF-S-STAT-5 |
NV3 Static Hanger 5mm thick for TUF – (3 holes) |
| NV2 Adhesives | |
|---|---|
Product Code | Description |
06/STA-205-1LTR | SIka® Aktivator – 100 – 1 Litre |
06/STPP-1LTR | Sika® Primer-206 G+P – 1 Litre |
06/STS-600 | SikaTack® Panel – 10 – 600ml sausage |
06/STT-33M | SikaTack® Panel Fixing Tape – 33 metre roll |
Fasteners
for NVELOPE® support systems
| 04/SDA5/5,5×20 | |
|---|---|
| Bracket to Vertical Rail & Carrier profile to Vertical Rail Fixing | |
 |
|
| Fastener material A4 Stainless Steel with carbon drill tip | |
| Diameter 5.5mm | |
| Length 19mm | |
| Max Grip Range 8mm | |
| Drill Capacity 8mm | |
| Material Aluminium | |
| 04/SX3/28-S16-6X48-A4 | |
|---|---|
| Bracket to Steel Stud fixing A4 (316) stainless steel self drilling fasteners | |
 |
|
| Fastener material A4 Stainless Steel with carbon drill tip | |
| Diameter 6mm | |
| Length 48mm | |
| Max Grip Range 28mm | |
| Drill Capacity 8mm | |
| Material Steel | |
| 04/TDA-S-S16-6,5X60 | |
|---|---|
| 6.5mm x 60mm Timber Fixing with 16mm Washer | |
 |
|
| Fastener material A4 Stainless Steel with carbon drill tip | |
| Diameter 6mm | |
| Length 64mm | |
| Max Grip Range N/A | |
| Drill Capacity N/A | |
| Material Timber | |
| 04/MULTI-MONTI-S-10X85 | |
|---|---|
| Stainless steel Primary Concrete Structural Anchor | |
 |
|
| Fastener material A4 Stainless Steel bi-metallic |
|
| Diameter 10mm | |
| Length 85mm | |
| Max Grip Range N/A | |
| Drill Capacity N/A | |
| Material Masonry | |
| 04/SXR-10X80-FUS | |
|---|---|
| 10×80 A4 (316) Anchor with polyamide sleeve Bracket to Concrete/Brick fixing | |
 |
|
| Fastener material A4 Stainless Steel with polyamide sleeve | |
| Diameter 10mm | |
| Length 80mm | |
| Max Grip Range N/A | |
| Drill Capacity N/A | |
| Material Masonry | |
Fasteners
for cladding attachment
Face fixing - Rivet
| AP16 Aluminium Rivet | |
|---|---|
| Ideal for cladding panels (HPL, fibre cement, others) to aluminium |
| SSO-D15 Stainless 316 Rivet | |
|---|---|
| Ideal for cladding panels (HPL, fibre cement, others) to aluminium, metal or stainless steel |
Face fixing - Screw
| SX3-D12 Stainless Steel Self Drill | |
|---|---|
| Ideal for cladding panels (HPL, fibre cement, others) to aluminium or steel |
| TW-S D12 Stainless Self -Tapping | |
|---|---|
| Ideal for cladding panels (HPL, fibre cement, others) to timber |
| irius® SX3-L 12 Stainless Self-Drill | |
|---|---|
| Ideal for cladding panels (HPL, fibre cement, others) to aluminium or steel |
| SDA4 D15 Stainless Steel Self Drill | |
|---|---|
| Ideal for cladding panels (HPL, fibre cement, others) to aluminium |
| SX4 D15 Stainless Steel Self Drill | |
|---|---|
| Ideal for cladding panels (HPL, fibre cement, others) to aluminium or steel |
Concealed fixing - anchors
| TUF/TUC Concealed Fastener | |
|---|---|
| Fastener for HPL, fibre cement, or fibre concrete panels |
| Keil Concealed Fastener | |
|---|---|
| Ideal for cladding panels (GRC, Dekton) |
| Karl Concealed Fastener | |
|---|---|
| Ideal for cladding panels (HPL, fibre cement, fibre concrete) |
| Tergo+ Concealed Fastener | |
|---|---|
| Fastener for fibre cement |
| Fischer Concealed Fastener | |
|---|---|
| Ideal for cladding panels (HPL, fibre cement, GRC or ceramic) |
| Fischer Concealed Fastener | |
|---|---|
| Ideal for cladding panels (natural stone) |